Constrained minimax optimization of continuous search efforts for the detection of a stationary target

Analytical resolution of search theory problems, as formalized by B.O. Koopman, may be applied with some model extension to various resource management issues. However, a fundamental prerequisite is the knowledge of the prior target density. Though this assumption has the definite advantage of simplicity, its drawback is clearly that target reactivity is not taken into account. As a preliminary step towards reactive target study stands the problem of resource planning under a min–max game context. This paper is related to Nakai's work about the game planning of resources for the detection of a stationary target. However, this initial problem is extended by adding new and more general constraints, allowing a more realistic modeling of the target and searcher behaviors. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

Production to order and off‐line inspection when the production process is partially observable

This study combines inspection and lot‐sizing decisions. The issue is whether to INSPECT another unit or PRODUCE a new lot. A unit produced is either conforming or defective. Demand need to be satisfied in full, by conforming units only. The production process may switch from a “good” state to a “bad” state, at constant rate. The proportion of conforming units in the good state is higher than in the bad state. The true state is unobservable and can only be inferred from the quality of units inspected. We thus update, after each inspection, the probability that the unit, next candidate for inspection, was produced while the production process was in the good state. That “good‐state‐probability” is the basis for our decision to INSPECT or PRODUCE. We prove that the optimal policy has a simple form: INSPECT only if the good‐state‐probability exceeds a control limit. We provide a methodology to calculate the optimal lot size and the expected costs associated with INSPECT and PRODUCE. Surprisingly, we find that the control limit, as a function of the demand (and other problem parameters) is not necessarily monotone. Also, counter to intuition, it is possible that the optimal action is PRODUCE, after revealing a conforming unit. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

石英角速率传感器数字相关检测技术研究

为提高石英角速率传感器(QRS)的测量性能,提出了基于数字相关检测技术的QRS信号解调方案。该方案需将一组互相正交的参考信号作为两个相关器的输入,能够同时分离出QRS敏感信号相对于参考信号的同相分量和正交分量。通过角速度提取算法可由以上分量进一步得到输入角速度。分析了实现参考通道功能的两种方法:锁相环(PLL)和Hilbert变换,通过对这两种方法的对比得知,PLL更适合作为QRS相关检测的参考通道。     

液体火箭发动机基于神经网络的实时故障检测算法实现

以某大型液体火箭发动机为研究对象,针对其启动和稳态工作过程,利用Matlab和Lab Windows/CVI等编程工具,基于神经网络技术,开发实现了其地面试车过程实时故障检测的BP(Back Propagation)和RBF(Radial Basis Function)算法。多次试车数据离线检验和实时在线考核结果均表明该方法能够及时、有效地检测出发动机工作过程中的故障,没有出现误报警和漏报警,并能够很好地满足现场试车的实时性和鲁棒性等要求。     

雷达实际平面探测威力模型与仿真算法研究

在考虑地物遮蔽的情况下,建立了3种程式雷达实际平面探测威力的数学模型,并对参数获取、盲区估算等问题进行了讨论。给出了一种基于DEM数据的雷达实际平面探测威力实用算法,实现了雷达在任意高度层的实际平面探测威力的自动仿真生成。应用表明,雷达实际平面探测威力图绘制的精度和效率较传统方法有较大提高。     

被动免疫算法在模拟电路故障诊断中的应用研究

基于生物免疫系统的信息处理机理,介绍了被动免疫算法的实现过程,并将其应用到某装备电路板的故障诊断之中。该算法具有边检测边学习的动态调整功能,仿真和实验实例表明,该算法适合于电路板的故障诊断,有较高的故障诊断率。     

扇形搜索下反舰导弹末制导雷达检测性能分析*

反舰导弹末制导雷达在进行自动跟踪前,首先要在方位向和距离向上对目标搜索并进行检测。末制导雷达的检测性能与脉冲积累数目、信杂比和搜索方式密切相关。针对反舰导弹末制导雷达常用的扇形搜索方式,提出一种二项式积累OS-CFAR检测算法。该方法在一个方位搜索周期内对距离向回波进行非相参积累。仿真分析表明,与常规OS-CFAR算法相比,该检测算法提高了末制导雷达的检测性能。     

航拍图像车辆检测中的圆形滤波器HOG特征快速计算

航拍图像中车辆一般近似为矩形结构,因此通过统计检测窗口中的梯度方向直方图并根据梯度主方向估计车辆朝向,将检测窗口旋转到相应方向进行分类器判别。车辆检测采用级联boosting分类器和梯度方向直方图特征,针对旋转窗口中梯度方向直方图特征的计算,设计一种基于圆形滤波器的梯度方向直方图特征。与传统基于积分直方图的梯度方向直方图特征提取方法相比,显著提高了旋转窗口中梯度方向直方图特征的计算效率,在计算每个像素的梯度时采用查找表代替梯度向量的求模和角度计算也减小了计算量。使用真实图像进行的实验表明,该车辆检测算法快速高效。     

利用支持向量机的矢量跟踪通道故障检测算法

为了克服卫星导航矢量跟踪接收机中故障通道对其他正常通道的影响,提高矢量跟踪接收机的鲁棒性,提出一种利用支持向量机的通道故障检测算法,利用矢量跟踪接收机的导航滤波器的新息序列作为支持向量机的输入。支持向量机的输出为通道的状态,根据支持向量机的输出通道的状态来判断该通道是否纳入导航滤波器,用来跟踪滤波器状态值,这样能够有效地避免故障通道对导航结果的污染。仿真实验结果表明:该方法能准确地检测出有故障的通道,提高矢量跟踪环路的鲁棒性。     

基于新的定位方法的空投技术研究

针对空投技术的定位问题,提出了一种新的定位方法。首先,在空投目标区域放置发射机,发射天线在3个方向形成彼此相交的波束,发射机与3个波束的交点构成中心线,3个波束关于中心线对称。其次,发射天线在3个方向发射相同功率,不同频率的信号。最后,载荷上的接收机实时接收信号,经傅里叶变换得到信号频谱图。3个信号功率相等时载荷位于中心线上,保持现有飞行方向;3个信号功率不等时,根据偏离中心线的位置对飞行方向进行调整,确保载荷能够准确到达目标区域。该方法具有较高的定位精度,能够适应复杂电磁环境。